

€326.02
€265.06
Wall formwork accessories
is a wide range of support components that improve installation and ensure safety on the site. Our range includes locks, tie-downs, brackets and other components that guarantee the stability and durability of formwork structures. Made of high-quality materials, these accessories meet the highest construction standards. Choose tried and tested formwork accessories to increase the efficiency and precision of your projects.
Release liquid + Formwork cleaner

TECHNICAL DATA:
-
Capacity: 5L
-
Condition: LiquidCapacity: 1 liter 5-8m²
-
Density: 1.1 g/cm³ at 20ºC
-
pH-value: approx. 1
Technical data:
-
Capacity: 10l
-
State of aggregation: liquid
-
Density: approx. 0.95. g/cm3 at 20 °C
-
pH: 7.5-8.5
Availability: Almost Gone
Cleaning fluid for formwork

TECHNICAL DATA:
- Capacity: 5L
- Condition: Liquid
- Capacity: 1 liter 5-8m²
- Density: 1.1 g/cm³ at 20ºC
- pH-value: approx. 1
Availability: Fully Stocked
Support uprighting kit

The complete set consists of:
- Uprighting support head
- U-type base (support foot)
- Two tube bases (vertical support connector)
- 8 fixing screws
Availability: Fully Stocked
Bolt tensioner TEKKO type

TECHNICAL DATA:
- Length of the element: 23.5 cm
- Length of the striker: 28 mm
- Hitch diameter: 15 mm
- Diameter of the abutment tip: 20 mm
- Material: steel
- Rod: 15/17
Availability: Fully Stocked
Formwork spring clamp 200 pieces + formwork tensioner set

TECHNICAL DATA:
-
Material: galvanized steel
-
Reinforced pinion in the clamp seat
-
Designed for rebar wires with a diameter of 5-10 mm
-
Base length: 10.5 cm
-
Width of the stand: 7.3 cm
-
Height of saucer: 2 mm
-
Load capacity up to 20 kN
-
Compliant with EU standards
-
Set of 200 pieces of clamps with key
Availability: Out of Stock
Formwork spring clamp 50 pieces

TECHNICAL DATA:
-
Materiał: stal ocynkowana
-
Wzmocniona zębatka w gnieździe zacisku
-
Przeznaczone dla drutów zbrojeniowych o średnicy 5-10 mm
-
Długość podstawki: 10,5 cm
-
Szerokość podstawki: 7,3 cm
-
Wysokość podstawki: 2 mm
-
Obciążenie do 20 kN
-
Zgodność ze standardami UE
- 50sztuk zacisków
Availability: Out of Stock
Liquid anti-adhesive oil for formwork 10l

Technical data:
- Capacity: 10l
- State of aggregation: liquid
- Density: approx. 0.95. g/cm3 at 20 °C
- pH: 7.5-8.5
Availability: Almost Gone
Metal stiffening beam

TECHNICAL DATA:
-
Length: 1.2 m; 1.5 m; 2 m; 2.6 m
-
Profile thickness: 6 mm
-
Hole radius: 5 mm
-
Width: 100 mm
-
Bar diameter: 9 mm
Availability: Fully Stocked
Minibox pin set 50pcs

Technical data:
- Diameter: 16mm
- Thread: 15/17
- Length: 30.5cm
- Material: galvanised steel
- Set of 50 pieces
Availability: Fully Stocked
Reinforced formwork spring clamp 50 pieces + formwork tensioner set

TECHNICAL DATA:
-
Material: galvanized steel
-
Reinforced pinion in the clamp seat
-
Designed for rebar wires with a diameter of 5-10 mm
-
Base length: 10.5 cm
-
Width of the stand: 7.3 cm
-
Height of saucer: 2 mm
-
Load capacity up to 25 kN
-
Compliant with EU standards
-
Set of 50 clamps with key
Availability: Fully Stocked
Set of centering pulls 200 pieces

TECHNICAL DATA:
- DW rod: 15/17 mm
- Rod length: 16 cm
- Base dimensions: 11x9.8 cm
- Base height: 7.5 mm
- Compatible with Tekko, Rasto systems
- Set 200 pieces
Availability: Almost Gone
Set of formwork clamps - tekko clip 1000pcs

TECHNICAL DATA:
- Element width: 70 mm
- Outer diameter of the round part: 18 mm
- Length of round part: 57.5 mm
- Material: galvanised steel
- Compatible with Tekko systems
- Set of 1000pcs
Availability: Almost Gone