Adhex white anti-adhesive emulsion

Adhex White is a biodegradable anti-adhesive emulsion containing selected mineral oils and vegetable oils. This product is designed for coating steel, wooden, plastic and other types of formwork.

ADHEX WHITE is recommended for non-absorbent or slightly absorbent formwork.
NOTE: For the product to work efficiently, it should be applied to formwork free of concrete residues and concrete slurry! Based on mineral oils.

It should be remembered that in unfavourable weather conditions, such as rainfall, care should be taken to ensure that ADHEX WHITE is not washed off the formwork. If this happens, it is necessary to reapply the coating to the formwork!

Useful information:

For optimal results, the product should be applied by spraying.

How to apply

- Spread the product evenly over the surface of the mould using a sprayer, roller or brush.

- Spray application gives the best results, ensuring a uniform layer and high efficiency of use.

- Before pouring concrete, make sure that the entire surface has been thoroughly covered.

TECHNICAL DATA:

• Capacity: 20 litres.

• Coverage: from 15 to 40 m².

• Application temperature: from 5°C to +60°C.

• Storage temperature: from 5°C to +60°C.