Ribbons
10 kN Italian vertical support
TECHNICAL SPECIFICATIONS:
- Adjustment range: 1.60–4.50 m (depending on the selected variant!)
- Load capacity: 10 (approx. 1 t)
- Prop type: italian
- Thread: internal adjustment
- Material: galvanized steel
- Outer tube diameter: 56 mm (wall thickness: 1.6 mm)
- Inner tube diameter: 48 mm (wall thickness: 1.6 mm)
- Base plate thickness: 4 mm (with mounting holes)
- Quantity: 1 piece
- Compliant with EU standards
SET INCLUDES:
- galvanized prop 10kN: 1 pc.
- base plate with tube: 2 pcs.
- U-shaped base: 1 pc.
- alignment prop head: 1 pc.
Sent to the email address provided in the order details
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Wybierz wariant produktu:
Individual variants may differ in price
Prop's length
Share the product card
Description
10kN ALIGNING PROP – ITALIAN TYPE
The 10kN Italian-type aligning prop (push-pull prop) is a specialized component designed for the precise positioning, leveling, and stabilization of wall, column, and lintel formwork, as well as precast elements.
Unlike standard slab props, the aligning prop features articulated (swiveling) end plates at both ends, allowing for installation at any angle relative to the ground and the formwork.
It transfers both compressive and tensile forces, ensuring complete structural stability during the concreting process.
Key advantages of the 10kN alignment brace:
- Extensive adjustability: continuous length adjustment via a threaded sleeve and incremental adjustment using a locking pin.
- Swivel heads/feet: articulated mounting plates adapt to the inclination of the formwork and the ground surface.
- Bidirectional operation: safely transfers pressure (compression) and suction (tension) forces caused by wind or concrete mix pressure.
- Guaranteed strength: a load-bearing capacity of 10 kN (approx. 1 tonne) ensures secure support for wall and column formwork.
- Durable Corrosion protection: resistant to harsh weather conditions and construction chemicals.
- Versatility: ideal for wall formwork, column formwork, structural walls, and the assembly of precast concrete elements.
The set includes:
- galvanized prop (10 kN): 1 pc.
- base plate with tube: 2 pcs.
- U-shaped base: 1 pc.
- alignment prop head: 1 pc.
Frequently Asked Questions (FAQ)
1. How does an alignment prop differ from a standard slab prop?
An alignment prop features articulated (swiveling) footplates at both ends, allowing it to be mounted at an angle. Furthermore, it is designed to handle loads in both directions (compression and tension), rather than just vertical top-down loads.
2. How is an alignment prop installed?
One end is secured to the base (e.g., a foundation slab or floor slab using anchors), while the other end is bolted to the profile or frame of the wall formwork.
*Self-assembly kit
