Ribbons
20-14 kN Vertical Support
TECHNICAL SPECIFICATIONS:
- Load capacity: 20 kN – 14 kN (depending on the extension length)
- Adjustment range: 1.00–3.60 m (depending on the selected variant!)
- Material / Finish: galvanized steel (pre-galvanized)
- Thread type: external adjustment thread
- Outer tube diameter: 60 mm
- Outer tube wall thickness:
for lengths 1.00–1.80 m; 1.80–3.20 m; 2.0–3.60 m: 1.8 mm
for lengths of 2.80–5.0 m: 2.2 mm - Inner tube diameter: 48 mm
- Inner tube wall thickness:
for lengths of 1.00–1.80 m; 1.80–3.20 m; 2.0–3.60 m: 1.8 mm
for lengths of 2.80–5.0 m: 2.2 mm - Base size: 120 x 120 mm
- Base thickness: 4 mm
- Adjustment pin thickness: 12 mm
- Adjustment hole spacing: every 12.5 cm
- Standards and Compliance: compliant with European Union (EU) standards
The set includes:
- galvanized prop 20-14kN: 1 pc.
- base plate with collar: 2 pcs.
- u-shaped base: 1 pc.
- head for vertical support: 1 pc.
- locking nut for supports: 1 pc.
Sent to the email address provided in the order details
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Wybierz wariant produktu:
Individual variants may differ in price
Options
Share the product card
Description
ALIGNING PROP 20–14 kN
A professional single aligning prop with a load capacity of 20–14 kN is an essential piece of equipment for any construction site where wall and column formwork systems are used.
This product is designed for the rapid, precise positioning and effective stabilization of formwork panels prior to the concrete pouring process.
Constructed from high-quality galvanized steel, the prop offers enhanced resistance to mechanical damage and corrosion caused by atmospheric conditions.
Key product features:
- Precise adjustment: enables accurate vertical alignment and positioning of the formwork.
- Durable galvanized coating: protects against rust and ensures a long service life, even under intensive use on construction sites.
- High load-bearing capacity: ratings in the range of 20–14 kN ensure structural stability, even under heavy operational loads.
- Convenient adjustment system: the telescopic design and efficient adjustment mechanism allow for quick length adaptation to project requirements.
The set includes:
- galvanized prop (20-14 kN): 1 pc.
- base plate with tube: 2 pcs.
- u-shaped base: 1 pc.
- head for vertical alignment prop: 1 pc.
- locking nut for props: 1 pc.
Frequently Asked Questions (FAQ):
What is a single alignment prop used for?
A single alignment prop is used for leveling, plumbing (aligning vertically), and stabilizing wall, column, and fence formwork prior to pouring concrete. It prevents formwork panels from shifting due to the pressure exerted by the concrete mix.
Is the set supplied fully assembled?
The set is designed for self-assembly. The set includes all necessary accessories (such as a head, a locking nut, base plates, and a support element), which can be assembled quickly and easily on the construction site before use.
How is the formwork prop attached to the formwork and the ground?
The prop is attached to the formwork panel using a head and a locking nut (or formwork bolt), while it is secured to the ground (e.g., a concrete slab or foundation footing) using a base plate and concrete anchors or dowels.
*Self-assembly kit
