Electric concrete vibrator motor Dingo

Handles designed to protect the motor circuit from impacts. Reinforcement of the cable at the motor outlet. Body with strength 5 times the standard requirements. Three handles around the motor body and an additional handle at the rear for maneuvering with short shafts and for vertical work. Anti-abrasion hose with integrated mesh reinforcement and internal steel strip. Roll joint reinforced with retreading. Strap easy to remove and adjust. Foam filter and mesh at the air inlet. Switch sealed and protected against impacts. Shafts from 0.6 to 6 m.

TECHNICAL DATA:

• Power: 2,300 watts
• Voltage: 230 V
• Frequency: 50-60 Hz
• RPM: 18000/min