Galvanised Prop 10kN H 2.20/4.00m used

The construction support is used to support H20 girders. The pylons can be used for formwork. They are also suitable for supporting lintels or balconies. The strength of the entire formwork system depends on the shoring.

The steel makes the supports durable and gives you solid support. Special holes in the product protect the hand from crushing. The internal adjustment thread allows you to set the seatpost in millimetre increments. 

The supports were tested for strength at the Regional Construction Laboratory of the Department of Engineering Structures, Faculty of Civil and Environmental Engineering, Gdansk University of Technology.

TECHNICAL DATA:

• Load bearing capacity: 8-10 kN

• Material: galvanised steel

• Internal adjusting thread

• Safety holes every 12.5 cm

• Base thickness: 4 mm

• Holes in the bases allowing the supports to be bolted together

• Outer diameter: 48 mm / wall thickness: 1.6 mm

• Inner diameter: 40 mm/wall thickness: 1.6 mm

• The product shows signs of corrosion