Hoist Imer ET 200 N
Standard equipment:
✓ Motor with magnetic braking system
✓ Rotary with locking of operating position
✓ Protection against over winding of the cable
✓ Control panel with emergency stop button on 1.5m neoprene cable
✓ IP 67 16A connector
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Description
Hoist Imer ET 200 N
Construction hoist Imer ET 200 N it is adapted for operation at 210 - 235 volts, without affecting the lifting capacity. The rope drum placed transversely with respect to the, not always level, frame prevents the rope from winding up on one side. However, it is necessary to remember to block the position of the frame, so that when pulling in, for example, light and bulky materials, strong wind does not affect their movement.
Installation of the hoist possible on various types of mounts such as scaffolding, window, strut (between the ceiling and floor) free-standing (strut mount + lashings and ballast box) such as on the roof or on the crane.
Construction hoist Imer ET 200 N
Standard equipment:
✓ Motor with magnetic braking system
✓ Rotary with locking of operating position
✓ Protection against over winding of the cable
✓ Control panel with emergency stop button on 1.5m neoprene cable
✓ IP 67 16A connector
| Technical data | ET 200 N |
|---|---|
| Maximum capacity | 200 kg |
| Av. full load lifting speed | 19 m/min |
| Max. working height | 30 m |
| Rope length | 31 m |
| Wire rope | Ø 5 mm |
| Motor | 230V/50Hz, 0.75 kW, 1380 rpm., 7,2 A |
| Weight | 42 kg |
| SPL in operator's position | <70 dB(A) |
| Dimensions | width 330 / length 770 / height 520 mm |
| Dimensions for transport | width 350 /length 820 / height 500 mm |
Warranty 12 months
Log in with Facebook
Log in with Google
