Menu
Product of the Day:
€548.31
€445.78
Mortar mixer Imer Spin 15 A
Regular price:
Regular price:
product unavailable
Description
Mortar mixer Imer Spin 15 A
Spin 15 A is a Flow Mixer designed for continuous operation with plastering units and mixing such mortars as:
Pre-mixed cement screed (also with fibers)
Lightened screed with admixture of expanded clay with grain size <16 mm
Pre-mixed screed lightened with polystyrene foam
Cement-based plasters Lime-based plasters
Structural plasters with microfibers
Regenerative plasters Binders / mortars for injection
Insulating plasters based on polystyrene or cork
Mortars for reinforcement
Filling with shotcrete of grain size <8 mm
Self-leveling screeds based on cement
Self-leveling screeds based on anhydride
Thermal insulation screeds based on cork or polystyrene foam
Refractory mortars
Adhesives
The flow mixer is equipped with a patented direct-drive gearbox with high power and low current consumption. Such a solution allows the mixer to start even when the tank is fully loaded.
Cleaning of the device is limited only to disassembly and rinsing of the channel with the mixer.
✓ Electric control panel
✓ Removable mixing channel
✓ Hopper with material bag opener located at inlet
✓ Removable mixing chamber
✓ Mixing system with galvanized maintenance-free roller and wear-resistant blades
✓ Water supply system
✓ 10 meter water hose with connectors
✓ Self-priming water pump
✓ Water pump
| Technical data | Spin 15 A |
|---|---|
| Drum capacity | 60 l |
| Mixing perfomance | 15 - 18 l/min. |
| Max. grain size | 16 mm |
| Motor | 230V/50Hz, 1.4 kW |
| Engine operation category | S1 |
| Weight | 78 kg (packaged 82 kg) |
| SPL in operator's position | 65 dB(A) |
| Dimensions | width 722 / length 1380 / height 950 - 1165 mm |
| Package dimensions | width 800 / length 590 / height 830 mm |
Warranty 12 months
