Reinforced formwork spring clamp  50 pieces + formwork tensioner set 

Spring clamp is one of the most frequently selected elements on construction sites. With it, you will connect formwork panels using standard rebar wire. In this way, you do not need to use a tie and a spacer tube.

The clamp offered by us has been reinforced with a special bracket. Thanks to this, the element can withstand loads up to 25 kN.

The spring clamp wrench is necessary to properly tighten the frog to the formwork. The tool will enable you to speed up the shuttering process.

The rubber handle ensures that the wrench does not slip from your hand during use.

TECHNICAL DATA:

• Material: galvanized steel

• Reinforced pinion in the clamp seat

• Designed for rebar wires with a diameter of 5-10 mm

• Base length: 10.5 cm

• Width of the stand: 7.3 cm

• Base thickness: 3 mm

• Load capacity up to 25 kN

• Compliant with EU standards

• Set of 50 clamps with key